![]() |
|
|
|
#1
|
||||
|
||||
|
It's been a while since your original post, I couldn't find it, if you can find it and link it it would be helpful.
I didn't know the tube was attached to the cabinet, that makes it more difficult. A Sams will still be helpful, I don't think I have that one but perhaps someone else does and could scan it? |
|
#2
|
||||
|
||||
|
Can you stand the chassis behind the cabinet and scoot it close enough to hook things up?
![]() Or, perhaps you can slide it partway out and still make connections. In this case, I only had to extend the speaker leads. ![]() In another case, I temporarily soldered wires to test points and ran them out to where I could access them when the chassis was fully installed. Just some ideas . . . Phil Nelson |
|
#3
|
||||
|
||||
|
Quote:
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free" |
|
#4
|
||||
|
||||
|
Yah, I just got a DuMont RA-113 with similar issues. The yoke hangs from the cabinet ceiling and all of the leads are short. Impossible to play on the workbench unless I build a stout frame (almost a box) to hold both the yoke and CRT, which ain't gonna happen. I found a guy with a test CRT. He wants $75 + shipping. My plan is to finish recapping and then see how it works in the cabinet. The top of the chassis is quite accessible when it's installed, so maybe those hijinks won't be necessary.
Phil |
|
#5
|
||||
|
||||
|
If you find another test CRT please PM me! I think that this is the REAL way to win the battle. Those DuMont's are bulletproof and EVERYTHING is heavy! I would hate to be trying to buy, or have built, a power transformer for something like an RA109-A!
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free" |
| Audiokarma |
|
#6
|
||||
|
||||
|
[QUOTE=Eric H;2987875]It's been a while since your original post, I couldn't find it, if you can find it and link it it would be helpful.QUOTE]
Hey Phil, I looked too and found no pictures. Maybe I posted pics on AudioKarma before the split. Anyway, you mentioned cut and dry symptoms so I decided to re-list them to avoid confusion: 1. No vertical sweep. Turning the LIN and Height controls way out of range will get maybe one inch of sweep. 2. Volume adjustable hum for sound with no evidence of signal presence. 3. Open coil that I am not sure how to identify. Black rubbery coating with a green dot on the side. Around 3/4" in length by maybe 3/16" diameter. I am pretty sure it is in the video section and it is mostly hidden inside one of the coil cans. I have a schematic coming and I can be more specific concerning location. It seems like I saw a schematic once before and no part# was given for the coil; only a resistance value. This is the way the set was when I got it AND after replacing all of the capacitors except ceramic discs. I wish I had an LCR (?) meter! I have DVOM's with capacity function, but I am told that they are not accurate. Right now, I am primarily focused on getting the sweep and finding out what the constant hum is about. Since they are both such persistent symptoms I figure that somehow they might be the same problem. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|