![]() |
|
#4
|
||||
|
||||
|
Here's a closer look at that blackened corner.
![]() My first thought was the filter cap had gone bad and the 18 ohm flexible resistor going to it had fried. Nope. I removed it and it's fine. ![]() 35W4 tests fine as do the other components in the immediate area until I rotate this cap around. One end breaks off and I see a charred interior. It must have really smoked when it failed! ![]() I'll try cleaning up that area using some QTips and alcohol. I had been considering restuffing the paper caps until I tried melting out one of the SEALDTITEs. They're not the usual paper tube sealed with wax. More like a hard resin tube with a paper label. Smells horrible when melted ![]() So, I'm just soldering in new caps. Should be ready for a powerup tonight. |
| Thread Tools | |
| Display Modes | |
|
|