![]() |
|
#5
|
||||
|
||||
|
Belden 8871, 8872, 8873 and 8874 are part numbers for the polarized and non-polarized Cheater cords. We used to sell them in the 80's at the distributor I worked for. Dunno which one is which now, some had ears for rivets, others were "true" cheater cords, without the ears.
The long-nose Zenith cheater cord was another series, IIRC. Usually, a call to Zenith was necessary, as Carol cable and Zenith were about the only suppliers for the Zenith cord. Some (early) Panasonic AC cords in the figure 8 style worked with standard AC interrlocks, but the newer stufff won't. I recall we had about 15 - 20 cheater cords, and even one "suicide cord" with aligator clips on the end. All told, we had cords for Sony 4 and 6 pin, BSR turntables, V-M Turntables, Polarized, non-polarized, one Panasonic "D",one Panasonic 8, early and late, an RCA 2-wire IEC, a Hitachi boombox cheater, a Zenith long nose, a dual cheater (for service calls), and a homemade Grundig table radio one, made of some of the greenest, stinkiest epoxy ever. Edit: Here's a pix of the 8873: www.talonix.com/images/pwr/Belden8873.jpg Still dunno about the rest. Cheers,
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! Last edited by Findm-Keepm; 11-22-2010 at 09:59 PM. Reason: added pix link |
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|