![]() |
|
|
|
#1
|
||||
|
||||
|
Have you scoped the grid and the cathode of the G-Y amp while feeding color bars to the set?
|
|
#2
|
||||
|
||||
|
On one of my 7s, I found wax had dripped into the G-Y socket causing the loss of signal to the CRT. Don't know if that's happening in your chassis, but thought I'd mention it. I replaced the wax caps with mylars. No more trouble.
Kevin
__________________
stromberg6 |
|
#3
|
||||
|
||||
|
Quote:
Kev- I've already totally recapped all waxies on this one, and the sockets (though old) are pretty clean. Thank for the tip though, the wax was indeed all over the underside of the chassis!
__________________
Evolution... |
|
#4
|
||||
|
||||
|
Quote:
Quote:
I suppose it is possible that there's a bad resistor on either the red or blue amp that might cause a degraded signal at the green amp, I'll check that next.
__________________
Evolution... |
![]() |
| Thread Tools | |
| Display Modes | |
|
|