Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 10-13-2010, 12:17 AM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
I did enough recapping to get the Horiz Oscillator running, the biggest problem with that was an open Cathode resistor on the Horiz Output tube. It's supposed to be something like 80 ohms but it was measuring infinity, I jumped it with a 68 Ohm resistor and it started running.
The HV is still too low to make it to the CRT, probably because the filters are bad but I'm satisfied for tonight.

I've never seen a set that used 6W4's for the low voltage rectifiers but this one does, two of them.

I have a Brochure <--(Download it) for the 1949 Westinghouse lineup, this model was their bottom of the line economy model.

My favorite line from the Brochure "It has adequate manual controls" nothing great, just "Adequate"
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:46 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.