Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 10-09-2010, 08:21 PM
ctc17 ctc17 is offline
VideoKarma Member
 
Join Date: Jul 2009
Posts: 1,615
I would sub out the color crystal first thing. It doesnt have to drift very far to cause exactly what your describing and seems to be the no1 issues I run into in the old rca sets.
Spraying the crystal wont tell you either. When they get flaky its to a few degrease of change, not freezing a warm crystal.

You can pop any colorburst crystal in there for testing. One or the small ones out of a solid state set will work for testing. If thats the problem you want to locate an NTE358.

There should also be instructions in the sams for fine tuning the osc frequency. Usually you inject color bars and ground out a few points. The color bars will float and barber pole, you will adjust the osc slug to slow them down as much as possible. This beat matches the osc in the set to the osc in your generator. You just need to be sure you have a fairly good generator that the chroma crystal hasnt drifted in.

First sub out the crystal before tweaking any slugs though.

Last edited by ctc17; 10-09-2010 at 08:29 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:05 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.