![]() |
|
#4
|
||||
|
||||
|
I did one just like this for a buddy of mine a few years ago. I recapped it and cleaned the contacts etc, but the case was in excellent condition and only needed a few little nicks touched up with a black sharpie and then black paste shoe polish all over. On one a little worse you could use black shoe dye. But in your case, John, I think you'd need to recover it. These are really nice radios once they are redone. I'd say you got a good deal on it.
BTW the line cord needs a side entry plug rather than the common rubber one somebody stuck on there in the photo series.
__________________
Reece Perfection is hard to reach with a screwdriver. Last edited by Reece; 10-10-2010 at 11:04 AM. |
| Thread Tools | |
| Display Modes | |
|
|