Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-05-2010, 03:36 PM
RitchieMars's Avatar
RitchieMars RitchieMars is offline
VK Member
 
Join Date: Apr 2010
Location: Fountain Inn, South Carolina
Posts: 244
Well, one thing I noticed is that the control I was calling the "screen register" is actually the A.G.C. delay. The A.G.C. isn't labeled on the control panel and it's right next to the screen control, which is unused. It's just an empty hole?

So yeah, I can get better contrast by bringing the A.G.C. delay down ( darker but more contrast ) and turning then turning the brightness up. However, the lower the A.G.C. goes, the louder the buzz, and to a certain point, the horizontal starts to jitter really bad.

Last night, I figured out how to auto-program the VCR and use it as a cable box. The television's tuner may be out of alignment, but at least I can get channel 3 cleanly enough to flip through the channels on the VCR without much trouble. Many channels still need a bit of a tweaking to get the buzz to a moderate level ( fine tuning, buzz control, etc ) to where it's not perfect, but certainly watchable.

Where would these peaking coils be located, if I do indeed have one that's potentially open?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:45 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.