![]() |
|
|
|
#1
|
||||
|
||||
|
I have Comcast basic analog cable and am able to just use a 75-300 balun for all of my vintage TVs to get channels 2-13
|
|
#2
|
||||
|
||||
|
So does this imply that the VHF rotary tuner can still be used to change channels? If so, can I also attach the 75-300 Balun to the UHF to get channels 14-83 (or 51 for some sets)?
|
|
#3
|
|||
|
|||
|
---
Last edited by andy; 12-08-2021 at 05:44 PM. |
|
#4
|
||||
|
||||
|
Quote:
|
|
#5
|
|||
|
|||
|
---
Last edited by andy; 12-08-2021 at 05:44 PM. |
| Audiokarma |
|
#6
|
||||
|
||||
|
I get 2-31 (minus a few channels in-between), 70, 96, and 98. So could I possibly get a few channels?
Last edited by mwplefty; 09-30-2010 at 10:16 PM. |
|
#7
|
||||
|
||||
|
The one caveat about cable hookups these days is that a few of the systems out there are entirely digital. If that is the case, you won't see anything but "hypersnow" on an analog set, and no converter (other than one rented from the cable company) can fix it.
More common is what one very large CATV corporation is doing - offering only some of the programs available over-the-air (the ".1" channels) in analog. If your cable system offers many channels in analog (you can test this by plugging the cable into a "BPC" set made from the late '80s to 2005). For analog cable systems using the midband and superband channels, there is one really cheap solution for using an old "knob" set - a used VCR. Nearly all VCRs newer than about 1989 have a cable-ready tuner, simply leave the TV on channel 3 (or 4) and use the VCR tuner for changing channels. Now that so many people are using DVDs for movies and TiVos for timeshifting, VCR are abundant and selling for about $7 at thrift stores. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|