Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 09-26-2010, 04:24 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
Some "Specials"

In my attempt to collect the various Triplett 310 models, I have encountered a few custom models, built for other companies, and perhaps an engineering special.

Pix 1 shows a 310 type 3 that appears to totally standard except for the "Simplex" logo on the meter face.

Pix 2 shows a highly modified model 310C type 2 made for IBM. It does not have clamp-on amp probe attachment point on the top of the meter case, and the DC voltage range is modified for a much lower range (0.6 to 60V only). Note that the usual 600v AC & DC receptacles on the meter face are labeled 30VDC and 60VDC.

Pix 3 shows a curious model labeled "310-x"... it appears to be a totally standard 310 type 1 except for the labeling of the lowest amp range on the range switch... "0.6" replaces the normal ".6" as the designation for the range. While "0.6" might be more mathematically correct than ".6", it appears less aesthetically pleasing IMHO, on the range switch.*

If anybody has other "special" 310s please post 'em up here!

*up-date : I looked at the meter again, and concluded that the designation on the switch might actually mean ".06" rather than "0.6"... tested the meter and it appears that is indeed the case, the range is 60 micro-amps full scale !...Perhaps a special for a customer requiring a very low current DC range, for some reason. Xerox perhaps?

jr
Attached Images
File Type: jpg DSCN1136.jpg (62.4 KB, 55 views)
File Type: jpg DSCN1137.jpg (62.3 KB, 68 views)
File Type: jpg DSCN1135.jpg (61.6 KB, 57 views)

Last edited by jr_tech; 09-27-2010 at 12:28 PM. Reason: Correct 0.6 statement
Reply With Quote
  #2  
Old 09-30-2010, 04:12 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
310 Tel

Today, I received an eBay win of a model that I have not collected before, the 310 TEL. (Pix 1) The 310 TEL appears to be a current model, as it is listed on the Triplett/Jewell website*.
The 310 TEL is a 20k/5k ohms per volt DC/AC like the standard 310 model but has a polarity reverse switch, normally seen on only the 310C. In addition, the Higher voltage receptacles (normally 600 or 1200v) have been plugged, so the highest range is only 300v AC or DC. While it retains the attachment point for the Amp-Clamp probe, the extra meter scales have been eliminated. I am assuming that this is a "stripped down" model aimed at the telephone industry. The label on the back tells a sad story (Pix 2).

*link to website (not affiliated)
http://www.triplett.com/product_info...roducts_id=101
jr
Attached Images
File Type: jpg DSCN1154.jpg (55.0 KB, 53 views)
File Type: jpg DSCN1156.jpg (65.9 KB, 59 views)

Last edited by jr_tech; 09-30-2010 at 09:24 PM. Reason: add link
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.