![]() |
|
|
|
#1
|
||||
|
||||
|
Definately the yoke. Unusual in these earlier sets, but, not un heard of.
That's a 10" set, I believe. I think the replacement is DY-1. I used an RCA yoke on a 10" Bendix when vertical winding shorted out, and, I got a keystone picture. Yoke worked.Was a little short on top, but, I think there were other issues, as well. Bill Cahill
__________________
"Tubes are those little glass things that light up orange unless there is a short.. Then they light up all pretty colors..." Please join my forum. http://www.tuberadioforum.com/ |
|
#2
|
|||
|
|||
|
Thanks, Bill. You're right. The tube is a 12LP4 and Scotty just rebuilt it! Now I'll have to go scouting for a replacement yoke!
|
|
#3
|
|||
|
|||
|
Hello again. I'm having trouble figuring out whether or not a yoke now listed on eBay is in fact a reasonable substitute for the RCA 71420 yoke used in my RCA T120 mentioned above. The eBay entry calls out its listing as being a substitute for an Emerson 708130, Stancor DY-1 and/or Merit MD12. However a catalog listing for the Stancor DY-1 shows a resistance of 8.3 ohms for the horizontal windings and the schematic for the T120 calls out a resistance of 13.5 +/- 10% ohms for the 71420 yoke. Seems to me to be too big a difference for the Stancor not to load down the flyback transformer. What's right here? I'd appreciate a quick answer as this item goes out tomorrow at 9:52 am PDT. Many thanks.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|