![]() |
|
|
|
#1
|
||||
|
||||
|
Oh my. It is well that I do not live in Chicago, for I would surely risk deeply annoying my wife by going after yet one more "large thing for which we have no room." Phonos are my second love (after aforementioned wife.)
|
|
#2
|
||||
|
||||
|
Hope I didn't step on anybody's toes. If I could work out shipping with him, I wrote that I will take it. I had that model as a teen ager.
I like the lighted adjustable strobe on turntable. Yes, it's a nightmare. Motor is mounted on its' side. Large beveled disc. Main wheel rides up, and, down on that to adjust speed. Small wheel on shaft drives turntable. Come to think of it, I think it's the motor that moves up, and, down. Neat mechanism, though I admit tricky. Plus, look at that hole someone kicked in the side. Ouch! Bill Cahill
__________________
"Tubes are those little glass things that light up orange unless there is a short.. Then they light up all pretty colors..." Please join my forum. http://www.tuberadioforum.com/ |
|
#3
|
||||
|
||||
|
It looks like the record changer is in bad shape -- the pickup arm looks as if it's been torn off its pivot, the record spindle is bent ... and I don't know what else could be wrong. This unit will need a major overhaul before anyone can even think about using it, with the bad wiring and all (probably rubber-covered wire that's deteriorated with age).
I'd replace the Beam-O-Lite record changer with a modern one, unless you want to preserve the authenticity of this unit. There is a phono preamp tube in the radio/amp chassis (type XXFM) that will have to be removed or bypassed if a modern changer is used; if you leave the preamp in the circuit, the output of any modern cartridge will overdrive the tube many times over, resulting in horrible tone quality. The Beam-O-Lite pickup was a rather low-output device, hence the need for the preamp. Moreover, it is a single-speed changer (probably 78 RPM), so unless you have a bunch of 78s you'd like to hear again (or transfer to tape), I'd replace the changer with a modern four-speed one, if such can still be found in this age of CDs and mp3s. If you are intent on replacing the Beam-O-Lite changer with an authentic one, however, I'd look for a junker console similar to the one you have and get the changer from it. I don't know how common these combinations are anymore, but you could probably still find one on eBay or even CL if you do some looking. Finding parts for one of these old changers could be like finding a needle in a haystack.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. Last edited by Jeffhs; 09-06-2010 at 11:38 AM. |
|
#4
|
||||
|
||||
|
Found a bit of info about the Beam-Of-Light changer here:
http://www.philcorepairbench.com/phono.htm I have never seen one before. Pretty impressive use of technology for the day... no wonder you guys want one! jr Last edited by jr_tech; 09-06-2010 at 03:14 PM. Reason: add picture from linked article |
![]() |
| Thread Tools | |
| Display Modes | |
|
|