Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 08-28-2010, 09:55 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I remember working on one Magnavox, circa '74-'75 19" set that had an inline tube with a bonded yoke. I don't remember the chassis number; but, it was the chassis that was around just before the vertical T991 19" chassis came along. The T991 was one of the ones that used a 4 lead safety cap that was very prone to shorting and this set also used a bonded yoke CRT.

I've seen some other cheap imported sets of the '70's and '80's that had a label on the CRT that warned that the yoke and convergence assembly was bonded to the CRT and warned the servicer not to attempt removal. However, on these very sets, I have loosened the clamps and the yoke and convergence assembly came off as easy as any other non bonded yoke.

Bonded yoke tubes are nice in the fact that one does not have to fool with purity and convergence; but, they are not so nice if the yoke becomes defective and the whole CRT has to be replaced.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.