Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 08-19-2010, 09:04 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
I would start by checking for bias voltage on the horz out tube.

also monitor the horz out cathode, if it starts to soar then shut down and firgure out why.

check the resistance readings on the fly.

I do like to install fuses for one thing it makes the horz out current check easy, not to mention I hope it would pop before any damage is done due to a tube failure.

example I use a 310ma on a hot that draws 220. I have seen the current soar when the horz osc was not installed (simulate a burned out tube).

I also like to install fuses on the B+ again just a bit over max (750ma on 500ma B+) the current tends to come up slowly, so you can be conservative on fuses (both B+ and cat)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:52 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.