Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 08-14-2010, 08:00 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I don't think I've had a tripler go bad in this chassis; but, I have had one go bad in one of the newer flat chassis RCA colortrak sets of the late '70's. The symptom was a squealing sound at turn-on followed by the set shutting down. When I unsoldered and removed the HV input wire (wire coming from flyback transformer) to the tripler, the set came on and stayed on. There was, of course, no HV to the CRT; but, it had sound from the speaker. If you remove the input lead to the tripler, make sure it can't arc to something else. If the tripler is bad, removing it from the circuit should restore sound from the speaker.

Over the years, I've found that the triplers in RCA sets are more reliable than the ones in Zenith and Sylvania sets. I'm basing my opinion on the number of RCA triplers that I've replaced vs. triplers in other brands.

Oh, and I remember one other bad tripler in an RCA CTC68 console. That one actually cracked and busted in half.

If I were close to you, I'd be glad to take on your set. Hopefully, someone in your area will chime in and agree to help you out with this one.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:07 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.