Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 08-02-2010, 12:20 AM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by David Roper View Post
wa2ise, check the parts list. It clearly says the choke is 'part of the speaker' which is borne out by the picture bandersen posted.
Looks like you're right, though under the Sam's listing for the speaker replacement, for "Field resistance" it says "PM". Source of my confusion. But further down it says that the L1 choke is part of the speaker assembly. And I don't see it on the TV chassis . Admiral may have changed, in later production, from the field coil speaker to a PM one, and used a regular choke for L1, mounted to the speaker frame. In any event, you'd be more likely to find separate speaker, audio transformer, and filter chokes, and you could build a replacement assembly with that, if it turns out that the picture tube, flyback and so on are in good condition. A temporary kludge would be to use a power resistor of about 85 ohms and some extra capacitance across cap C1B to make up some of the lost filtering the choke would have given you. A 100uF cap probably.
__________________
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:18 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.