![]() |
|
|
|
#1
|
||||
|
||||
|
Radio Daze carries Hammond chokes and there are two available that would work:
193H is a 5 henry choke in an enclosed case; 157R is a 2 henry choke with an open bracket mount. Neither costs less than 20 nor more than 30 dollars. ETA: It probably would be helpful to link you to this schematic assuming it is the one for your set. Last edited by David Roper; 08-01-2010 at 10:25 PM. Reason: added link |
|
#2
|
|||
|
|||
|
Thanks! One speaker that I thought might work looks to only have a 7 or 8 ohm resistance on the field (not voice coil), I suspect it's just shorted. I'll turn up a perminant magnet speaker for now, before I go any further I'll test the picture tube and make sure I'm not putting money into something I can't get working
Thanks again, this is a huge help!
|
|
#3
|
||||
|
||||
|
Quote:
The filter choke specs out to be 2.5H and 200ma.
__________________
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|