Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 07-27-2010, 10:16 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Did you check the B+ to make sure it's within limits. Usually, the regulated B+ is never over 135VDC. Most solid state sets from the '70's on have a fail safe circuit that will either throw off horizontal sync or kill the horizontal oscillator completely in the event of excessive HV, which is usually caused by high B+. In many of these sets, a flyback failure would short the HOT, which would then short the B+ regulator. If the B+ is too high and you keep running the set, you may cause excessive X-radiation, as well as ruin the new flyback, the CRT, or other parts.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:31 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.