Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #33  
Old 07-21-2010, 07:06 AM
miniman82's Avatar
miniman82 miniman82 is offline
First Light: 1952-2011
 
Join Date: Jun 2009
Location: Great Mills, MD
Posts: 4,183
Well I tried lowering the drive signal to the 6DQ5 unsuccessfully, lowest I was able to get it was 179ma and that's after trying some of the things outlined in Sams on adjustment of the horizontal section. Tweaking the horizontal linearity coil got me a drop of a few ma, but I can't check anode voltage just yet to finish the proceedure. Basically what you do is monitor cathode current on the horiz output tube and HV reg, turn the focus and HV pots all the way down, then adjust the horiz waveform coil for equal peaks, adjust horiz lin for 'lowest reading' on the output cathode, then tweak the HV pot to read .8ma on the 6BK4 cathode.

That reminds me, does anyone in Chi Town have a scope they'd let me borrow, so I can tweak the waveform coil?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:28 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.