Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 07-11-2010, 08:38 PM
miniman82's Avatar
miniman82 miniman82 is offline
First Light: 1952-2011
 
Join Date: Jun 2009
Location: Great Mills, MD
Posts: 4,183
I figured.

That being the case, the problem now becomes where to get the correct voltage to clamp the signal to? I read somewhere that to do it accurately/reliably enough, you would need a DAC. Idea is that you use a microcontroller to set the DAC to an accurate black level, then use the LM1881 to clamp the signal to the DAC generated voltage. The McGyver in me says there's another way, though.

The article I referenced in my first post mentions a comparator in the feedback loop of the video amp: why not use the LM1881 to trigger the comparator, thereby stabilizing the black level before the beginning of each horizontally scanned line?
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:31 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.