![]() |
|
#29
|
||||
|
||||
|
I spent some more time searching around online and found OnlineMetals.com
The original back is 18-22 gauge (sorry no caliper) with 5/16" holes on 0.5" center. 6" x 16" with a 1/2" lip on the bottom to hold the power cord bracket. The closest they have is 16 gauge with 3/8" holes on 9/16" center. The best part is they'll cut it for a very reasonable price. I'm ordering 2 pieces at 6.75" X 16" @ $10.80 a piece. Otherwise, I could go with 12 inches x 24 inches for $17.84 and cut it myself. If I can't manage to bend that lip, I'll just cut that 3/4" off and plug a cheater cord right into the chassis. (edit) It turns out that this size is perfect for an Admiral 19A11 set too so I ordered three ![]() - Last edited by bandersen; 07-07-2010 at 11:58 PM. |
| Thread Tools | |
| Display Modes | |
|
|