Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 06-30-2010, 05:40 PM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,383
strange horizontal problem

After running the set for a while, the horiz was shifted over a bit to the right with the horiz blanking bar right down the middle of the screen. I thought first, I have no problems with horiz size, and 2nd in order to have the picture visible like that the horiz oscillator also has to be at the right frequency, and because there was no trouble with the vertical, I figured the problem had to be in one of the few components coupling the sync separator to the grid of the horiz osc.

But I replaced them all, and it made no difference! Then I just swapped the 6SN7s from the horiz to the vert, and it fixed it. I originally had put the strongest testing 6SN7 I had in the horiz, but the horiz osc circuits in these sets just seem to be really picky about tubes. Remember in one of my Motorolas, the horiz wouldn't sync, and the trouble was a tube, which also didn't work as the horiz osc, but tested good and worked in other circuits.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.