![]() |
|
#11
|
|||
|
|||
|
Well, this is interesting. My control signal is reading 15 Hz during playback of any tape, even a brand new blank tape. It reads the usual 30 Hz until it loads a tape, then reads 15 Hz thereafter. When I eject the tape, it goes back to 30 Hz. So there's a good starting point - surely a 15 Hz control signal can have something to do with this. I'll see what happens when I force it to 30 Hz with the VC93.
|
| Thread Tools | |
| Display Modes | |
|
|