Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Recorded Video

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 06-27-2010, 01:44 PM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
Quote:
Originally Posted by Barry777 View Post
I took care to make sure the switching point is properly adjusted at 6.5H for recording and 4.5H for playback in the menu adjustments - but I know the software controls can only do so much if the circuit itself is faulty.

So now it's starting to look like an electrical alignment issue.
Sounds like an ESR meter is great for in-circuit cap checking? Which one would you recommend?
Are you looking at the head switching signal in one channel and the video in the other channel on an o'scope? I figure you are. PB sw-pt should obviously not be at the top of the picture. Sounds like the old symptom of a surface mount electrolytic in the head drum PG circuit, not producing a good PG pulse so the servo knows where the heads are, the FG is working since it's running at the right speed. A lot of those combined the FG and PG on the drum stator board into a single signal the servo IC could sort out. The cap that would fail on those was on the drum motor stator board.

About a year ago I bought my 2nd ESR meter in kit form:

http://www.anatekcorp.com/blueesr.htm

If you shop around for this one, you can find a deal that might still include the optional stand for it, free.

I also still have my original Dick Smith Electronics from Australia ESR meter, from about 10 years ago. It was also a kit, but it's been discontinued for a few years.

http://www.electronicrepairguide.com...or-tester.html

I'm not sure what's available these days, but I think there are some lower cost already assembled ESR meters. Others I see are now combining ESR and capacitance test in one meter.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:31 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.