Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #20  
Old 06-12-2010, 08:35 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
just read in the service manual from zenith that jittering vert could be due to a faulty service switch (the one I tried cycling several times) said something about making an "air connections" I assume they mean to just jumper it, also said meter may not see the resistance, therefore the recommedation to "air connect".

there was also talk about a diode/resistor combo to increase convergence range that I may look into (the right side is still just a bit out).

Lastly I think I will check on the cap that is connected to the pincussion coil. No mention of a problem but since its a tuned circuit I was thinking that maybe a out of spec cap may account for the lack of adjustment range, although its more like a lack of amplitude than freq since I can see the center widen to a point but then it starts to shrink back before its completly flat.

I am going to study that pin cushion circuit a few more times to see if I can get my head wrapped around it.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:55 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.