Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-10-2010, 08:44 PM
NowhereMan 1966's Avatar
NowhereMan 1966 NowhereMan 1966 is offline
Slave to 1 Cat
 
Join Date: Dec 2004
Location: Tiltonsville, OH
Posts: 888
Quote:
Originally Posted by DaveWM View Post
take a heat gun to it and gently warm up caps. I did this on a 2007 phillips SPC tv, the heat lowered the ESR enough for the set to turn on, it was a small 5uf cap in a regulator circuit. I was able to isolate the cap by heating different part of the main board until I found the problem area. Of course an ESR meter would have been less crude, but I dont have one, yet.
Would a hair dryer do? I'll have to give that a shot too.
__________________
Mom (1938 - 2013) - RIP, I miss you
Spunky, (1999 - 2016) - RIP, pretty girl!
Rascal, (2007 - 2021) RIP, miss you very much
Reply With Quote
  #2  
Old 06-10-2010, 09:33 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
Quote:
Originally Posted by NowhereMan 1966 View Post
Would a hair dryer do? I'll have to give that a shot too.

thats what I used, its a long shot but I know that sometime heat will make a marginal E cap function, at least long enough to find the problem. You dont have a lot to loose by trying. just heat up one spot and try it. You dont need to get it real hot, just warm.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:01 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.