Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 05-31-2010, 05:37 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
while fussing endlessly with the convergencem, I decided that something must be wrong. I makes almost no difference when plugged and unplugged (dynamic convergence).

So I decided to check the diode pack, hmm a long crack runs the length of it.

Tested 2 of the diodes, so far both are open. Squeezing the pack makes for momentary resistance readings. I checked the voltages on the conv board before pulling it, no DC reading where there should have been but AC reading instead (which is why I suspected the diode pack).

Anyhoo I have some 1n4005 diodes that I will use (the orig are 1n536).

I hope this does the trick...
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:36 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.