Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-29-2010, 11:38 AM
holmesuser01's Avatar
holmesuser01 holmesuser01 is offline
VideoKarma Member
 
Join Date: Jul 2005
Location: Asheville NC
Posts: 1,731
I'd try the real degaussing coil first before you start playing with the magnets.
Reply With Quote
  #2  
Old 05-29-2010, 02:48 PM
marty59's Avatar
marty59 marty59 is offline
VideoKarma Member
 
Join Date: May 2008
Location: Arlington, Tx
Posts: 915
Quote:
Originally Posted by holmesuser01 View Post
I'd try the real degaussing coil first before you start playing with the magnets.
Large, TV Repairman type degausers are still available and are a good tool to have.
Reply With Quote
  #3  
Old 05-29-2010, 10:00 PM
vinyldavid's Avatar
vinyldavid vinyldavid is offline
EFSP
 
Join Date: Oct 2007
Location: Creve Coeur, Missouri, USA
Posts: 239
Quote:
Originally Posted by andy View Post
It looks like it was dropped to me. You might be able to make it usable by adjusting the purity, and adding some small magnets to the bell of the CRT.
It was definitely dropped at some point or another, but the Video Tech that I got it from said that the magnetization happened before it was dropped, and he had no reason to lie.

Quote:
Originally Posted by kx250rider View Post
I'd check the solder connections under the degaussing thermistor (black cube; about 1/2" tall, near where the degaussing coil plugs into the board). VERY common to have that go cold, and it will energize for a picosecond in stead of the full second or so, which will actually magnetize and not demagnetize the tube.

Also it could be that the yoke has slipped due to a rubber wedge falling out. Check to see if the yoke pivots up & down or side to side.

If that isn't it, you can try the others' suggestions, but I'd refrain from using the magnets if at all possible. If you do have to go that way (ONLY, ONLY needed when the tube's been dropped), you need to unplug the degaussing coil or the new magnets will be weakened after while. When I do the magnet trick as a last resort, I first set the purity as very best I can, which minimizes the magnet needs. The procedure is easy for someone who has done it, but I can't say it's so easy if you haven't. Definitely let us post a procedure for you if you will be fooling with the purity for your first time, or you might create a monster.

Charles
Definitely dropped...that damage is obvious. my videotech friend should be able to help with that one. I'll open it up tomorrow and have a look.

Quote:
Originally Posted by marty59 View Post
Large, TV Repairman type degausers are still available and are a good tool to have.
Quote:
Originally Posted by holmesuser01 View Post
I'd try the real degaussing coil first before you start playing with the magnets.
I have a lead on one. Fairly far away, but I really want this to be my daily watcher, because I can rackmount it
__________________
Denon, Mackie, Lenco, JBL, Onkyo, Crown, Tascam, Teac, Otari, Ampex, Pro-Ject, Kenwood, Technics, Sound Engineering Labs, Apple, PreSonus, Panasonic, Shure, Realistic and JVC spoken here
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:15 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.