Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 05-27-2010, 12:33 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
while futzing with the set I noticed a pretty extreme reverse pin cushion (guess that it the way to describe it, the horz bends up on top and down on the bottom). 1st I checked the tube, checked ok on tube tester, and its new. Next I check the tube pin resistance mearurements to the sams, ok. I tried the pin cushion adj slug and was able to get some of it out but still there.

Its like it just runs out of adjustment ranges. The circuit controlling this has a pretty low parts count. I was next going to try checking to see if it has any plastic/paper caps still in it (the pin cushion circuit). Should prob try a tube substiution just to be sure about that as well.

Last edited by DaveWM; 05-27-2010 at 12:47 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:35 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.