Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-26-2010, 11:14 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Quote:
Originally Posted by PredictaNoob View Post
I used an electrostatic rust removal process to attack the deepest rust spots, using a 6-volt power supply
I meant to ask this question when you posted the photos, but better late than never.

What did you use as a power supply? I have an old trickle charger that I used to recharge my motorcycle battery each spring. Maybe that would work.

Those pieces looked so good after the electrolytic process was done, I'm wondering why you then went on to paint them. Did they still have pitting where rust used to be?

Phil Nelson
Reply With Quote
  #2  
Old 05-27-2010, 04:23 AM
PredictaNoob's Avatar
PredictaNoob PredictaNoob is offline
AK Member
 
Join Date: Apr 2010
Location: Heidelberg, Germany
Posts: 86
Quote:
Originally Posted by Phil Nelson View Post
I meant to ask this question when you posted the photos, but better late than never.

What did you use as a power supply? I have an old trickle charger that I used to recharge my motorcycle battery each spring. Maybe that would work.

Those pieces looked so good after the electrolytic process was done, I'm wondering why you then went on to paint them. Did they still have pitting where rust used to be?

Phil Nelson
That is exactly what I used, a 6-volt trickle charger; hooked the leads to a short length of wire attached to some super-cheap copper alligator clips (since they get destroyed in the process). I went ahead and primed and painted the pieces because I've found that even though the rust is removed/replaced, the 'aged' spots will quickly rust again with a vengeance. There was some pitting, but that was there before the process. Typically, whatever is present stays in place and will be replaced by the ferrous compounds. If the rust has left pits, it will remain pitted.

On an aside, years ago I found an 18th century toy gun outside of a castle in Rhineland-Pfalz. It was a rusted ball, that I thought was an actual gun. I worked on that thing for weeks, electro-bath, dental pick, again and again. After a few days, it was clean enough to recognize as a toy gun. Finally, I was able to free up the firing mechanism. I've been a believer in this process ever since.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:24 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.