Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 05-23-2010, 08:12 PM
ctc17 ctc17 is offline
VideoKarma Member
 
Join Date: Jul 2009
Posts: 1,615
I dont change the caps on those zeniths until they fail. They are good quality caps. I have 3 sets with that chassis and cant say I have had a cap failure yet. You may have to tweak with the sound coils to get the buzz to a minimum.
Check the cathode current. Should be around 250 but always seems a tad higher like 275.
Check the HV, lowering the HV raises the cathode current and load on the flyback. HV regulation basically is achieved by loading down the 900 volt boost. I have been leaving my sets up around 26-27kv.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:49 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.