![]() |
|
|
|
#1
|
||||
|
||||
|
There's some surface rust ontop of one of the chassis. What's worked for cleaning rust off chassis? I don't want to use steel wool, because I can see little metal bits getting in everything. I also don't want to use really rough sandpaper or a wirebrush that would put really visible scratches in the chassis. Maybe a little wet sandpaper 240 grit or so? Or what else works?
I might just sand and paint those rusty tube shields, and repaint the power transformer, but I'd rather not paint the chassis itself. |
|
#2
|
||||
|
||||
|
I'd try Naval Jelly before you break out the abrasives. Give it enough time to work -- at least half an hour. Clean up with wet paper towels.
You may still have some discoloration, but it usually improves things. By coincidence, I'm using this on a rusty chassis right now (well, this week -- I'm slow and lazy). You can follow up that treatment with metal polish, if you're the polishing type. I usually don't bother for TV chassis. Too many projects, too little time. Phil |
![]() |
| Thread Tools | |
| Display Modes | |
|
|