|
I went though all of the horizontal circuit and all seems ok there, there are some capacitors I can not check and I changed out two of them with no change. I did get some readings The horizontal drive is now down to -0.2v and on the other side of C73 (the horiz. sweep coupling) one of the caps I switched with no change I get a reading that started out at 130v but now its around 70v on the other side of the line filter C80 I get +350vdc. the screen voltage of the HOT is about half of what it should be at 100v and the grid 2 is at -0.2 and not -20 to -27.
so any suggestions on my next move?
|
05-18-2010, 09:19 PM
Threaded Mode