Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-16-2010, 04:05 PM
Patnukem Patnukem is offline
VideoKarma Member
 
Join Date: Jun 2007
Posts: 60
this may seem like a dumb question but the voltage at the Horizontal drive adjustment to ground should not be -25vdc right? When turned on it shoots up to 10 or 20 vdc then starts to fall to around -27 then it will start going back up very slowly the highest it would get was around -19vdc but I will not leave it on too long as I do not want to damage my HOT.

am I correct to assume the problem lies with in the Horizontal sweep circuit since I have no HV and my HOT is glowing red when on?
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:54 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.