![]() |
|
#10
|
||||
|
||||
|
The year would be also 1962 (RCC supplement No. 58), in fact the two schematics
I posted may have been on the market at the same time. Many areas in Canada at the time had no FM at all, so a cheaper AM-only chassis was a good selling argument. If I may add a few comments, I would say that this is a fairly good introductory project to tube radio restoration: the radio part of this unit is as simple as it gets while remaining useable for listening, and the amplifier should be reasonably good (with negative feedback as it is), although you should not expect tremendous bass from such small output transformers. The negative feedback is effected by resistors R40 and R41. If you have a working AM radio (a car radio would be best for this), do some listening after sunset (or before sunrise), you should get a number of stations. You may be right in assuming that the audio stages before the outputs are somewhat different from the schematic, this will have to be confirmed. Note that in the schematic, each 12AX7 is part of both channels, so if one of these tubes is shot, no sound will come out. I look forward to the under chassis pictures. Bye for now. |
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|