Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 05-14-2010, 07:16 PM
Patnukem Patnukem is offline
VideoKarma Member
 
Join Date: Jun 2007
Posts: 60
I disconnected the flyback all the resistance values seem close to the original and no shorts to the other windings. Looking though the photofacts horz. sweep setup it says to connect a volt meter up to the green wire that comes up in the middle (connects to Horizontal drive adj) to ground and should read 20 to 28 volts it goes up to 3 or 4 then drops down and stabilizes around -27v so I should assume something is wrong before this in the circuit?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:07 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.