![]() |
|
#27
|
||||
|
||||
|
That noise is probably small arcing from the goo that Doug was talking about. It will make for a bad connection. Discharge the CRT and clean the button and anode wire really well with alcohol then use a small amount of di-electric silicone around the boot to make a seal to the tube. That should stop the noise. Neat set, hope you get er right.
__________________
My TV page and YouTube channel Kyocera R-661, Yamaha RX-V2200 National Panasonic SA-5800 Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20 Pioneer SX-939, ER-420, SM-B201 Motorola SK77W-2Z tube console McIntosh MC2205, C26 |
| Thread Tools | |
| Display Modes | |
|
|