Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #35  
Old 05-10-2010, 10:37 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
Quote:
Originally Posted by Phil Nelson View Post
If those diodes are intended to replace the big green selenium rectifiers, I'd make sure that the old rectifiers are taken completely out of the circuit. (Don't leave them wired in parallel with new diodes, in other words.) Hard to see exactly what's going on in that third photo.

Phil Nelson
Most people also install some resistors in series with the diodes, so that the B+ voltage ends up being the same as it was when the seleniums were used.
Now people might throw rocks at me for this... but what about mounting the new diodes and proper dropping resistors on a terminal strip under the chassis, next to the fuse and eliminating the "tacked on" selenium housing/exposed wiring?

jr
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:48 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.