Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-08-2010, 12:50 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I replaced the damper and it now has HV, color, and full sweep. The convergence is, of course, about as far off as you'd expect since the convergence board and yoke are messed up. Also, while it was playing, I heard an arc and saw a split second collapse of vertical sweep. And, the vertical hold has to be all the way to one end in order to lock the picture. The first order of business will be to repair the convergence components.
Reply With Quote
  #2  
Old 05-08-2010, 01:55 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by radiotvnut View Post
I replaced the damper and it now has HV, color, and full sweep. The convergence is, of course, about as far off as you'd expect since the convergence board and yoke are messed up. Also, while it was playing, I heard an arc and saw a split second collapse of vertical sweep. And, the vertical hold has to be all the way to one end in order to lock the picture. The first order of business will be to repair the convergence components.
The vertical sweep problem may be part of why your convergence is out of whack. If the vertical hold must be set at one end of its rotation to synchronize the picture, the sync may be (probably is) very unstable. Sync problems, vertical or horizontal (particularly the latter) in color TV can cause serious convergence problems as well (one is tied in with the other). Fix the vertical sync, check the horizontal to be sure it's peachy (my term for okay), and I'll bet your set will converge just fine. Of course, if the convergence board and/or convergence yoke are out of order (as yours seem to be) for any reason, the convergence will go haywire at the drop of a hat. I'd fix that as soon as you get the vertical sync to the point where the picture holds solidly with the control at midrange; until you do the latter, you may have the dickens of a time getting the convergence right.

Good luck. You seem to be on the right track to getting this TV working again as it once did. A little more work with the sync and the convergence and you will have a television set you can be proud of; these older color sets can and do make excellent pictures when they are working as they should. You are saving another great old TV from certain death in a landfill as well.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:41 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.