Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 04-28-2010, 08:49 AM
Zenith26kc20's Avatar
Zenith26kc20 Zenith26kc20 is offline
VideoKarma Member
 
Join Date: Apr 2009
Location: New Orleans
Posts: 860
Did more research last nite. I looked at a CTC 9 so the info may be a bit off. First, remove the CRT socket and turn on the set. If the high voltage comes on OK, the tube is saturated and drawing too much current.
If this is the case, check all voltages on the color output plates (6FQ7) for around 350 volts or more. The cathodes must be a good deal more positive than the control grids (grid #1) to cut the tube off.
If HV is still low,
Check all connections around the flyback and look for a capacitor on the flyback off value. I recently went thru my TS-14 Motorola and found a .005 mfd new cap at .008 mfd upsetting the vertical. keep us updated
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:26 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.