Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 04-09-2010, 08:18 PM
rpm1200's Avatar
rpm1200 rpm1200 is offline
VideoKarma Member
 
Join Date: Jan 2006
Location: Rochester, NY
Posts: 247
Thanks for the advice. I'll be pulling the convergence ICs soon and I'll check the resistors out at that point. Two questions...

1. There are a lot of conflicting opinions out there concerning replacement of the STK392-110 convergence chips used in that TV. Some say go with the original part numbers, some say use the -120, -150 or -180 instead for better longevity, or even the STK394-160E... Supposedly the -110, -120 and -180 have the same specs, and the -150 is rated for higher voltage and current. Every individual seems to have a different preference. I suppose since these lasted since 2001, I really don't have anything to complain about. Any suggestions?

2. There are a lot of electrolytics around the convergence chips. Should I pull them and check for high ESR, or is that a waste of my time?

Thanks again, Rob
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:46 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.