![]() |
|
|
|
#1
|
||||
|
||||
|
This is somewhat of a gimmick. Sharp demonstrates it with pictures of brass instruments, which are a more highly saturated yellow.
A display with standared sRGB primaries produces a good range of color, somewhat weak on the cyans and also (but less so) on the yellow saturation. This can be fixed by using only three higher saturation wider gamut primaries. The problem with expanding the gamut by any of these methods is that it is phony to just turn up the saturation on everything unless the source is coded with a higher gamut of color. There are proposed standards for wide gamut color in DVDs and Blu-Ray discs, but I don't think any wide-gamut discs have been released. People who have bought wide-gamut displays for their computers have run into various problems when software doesn't recognize the color management aspects of this and the color saturation gets artificially increased. Also, since the color on LCDs varies with viewing angle, these variations are stronger when the primaries are more saturated. Using four or more primaries reduces the viewing angle variation, so that is one good aspect of using that method. You should also realize that the 1931 diagram posted above emphasizes the size of the green/cyan area. Plotted on a uniform chromaticity chart, the missed area in the magenta and purple part is about as big as that in green. |
|
#2
|
||||
|
||||
|
You Can't Make A Silk Purse Out Of A Sow's Ear
Quote:
|
|
#3
|
||||
|
||||
|
From the original 19th century demonstration by Maxwell, RGB has been the basis for every additive-color reproduction system, and it has worked very well.
I agree this is more gimmick than anything else, but the commercial is a hoot! http://www.youtube.com/watch?v=4hSnAxvRdmY OH MY!
Last edited by Indian Head; 03-22-2010 at 03:02 PM. |
|
#4
|
||||
|
||||
|
"Also, if you add a fourth, yellow, pixel to the RGB scheme, you must reduce the number of RGB pixels to make room for yellow."
Or did they increase the number of pixels on the display to add the yellow? ![]() "OH MY!" Indeed... fun commercial! ![]() jr |
|
#5
|
||||
|
||||
|
The main reason RGB works so well without yellow, is that the human eye has red, green and blue cone cells, and the brain sees yellow when some specific ratio of response from the green cones and red cones happens. A color CRT produces red and green light in the same ratio, tricking our brain to think that there is yellow light present. But a spectrascope looking at the CRT would only show a spike at green light frequency and another spike at red light frequency, and nothing at the yellow light frequency.
__________________
|
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
John |
|
#7
|
||||
|
||||
|
Here is a white paper on improving the color gamut by using multiple colors.
http://www.videsignline.com/showArti...leId=184425677 John |
![]() |
| Thread Tools | |
| Display Modes | |
|
|