![]() |
|
|
|
#1
|
||||
|
||||
|
I am not sure I understand all of this.
I am in no way knowledgeable about glass blowing and/or manufacture of CRT's...but SOMETHING seems amiss here with all of this. After all...at one time, not all that long ago...these 15GP/HP22 tubes WERE manufactured and /or rebuilt by RCA and others. Evidently, it was at least partially successful, as some of them still work, and at least often worked for at least 10 years or more after being built, before "giving up the (vacuum) ghost". And since they were made before...someone MUST still have the plans and/or machinery somewhere...or not??? So...what has happened to the 'original way of making these tubes"? Is it something like"there was only a couple of guys who knew how, and they took their secrets with them when they died long ago", or such?? Or...were these tubes GARBAGE from the beginning for RCA and did only one out of maybe 10 of them made actually work, for any length of time? |
|
#2
|
||||
|
||||
|
Not only did these tubes have different glass than later ones, they had an internal phosphor plate, so there was definitely a conflict between the temperature schedule for sealing and evacuation and protecting the plate from thermal damage. You also need to consider that the qualities of the glass change each time it is heated and cooled, so a schedule that works for original manufacture may not work for rebuild. I'm sure there are many other expert knowledge items that I don't know about, which disappeared when the last 15GP22 line was shut down.
|
|
#3
|
||||
|
||||
|
RCA 2000,
You ask many questions but here are a few answers. First, the 15GP22 was never successfully rebuilt by anyone except RCA. Guns were not available. RCA had the only source. Anyone else that tried to rebuild this tube used a standard 21" roundie delta gun which did not provide for electrostatic convergence and was not a compatible rebuild. RCA made the only production run of these tubes for general availability. Some other manufacturers "experimented" with limited experimental prototypes, but never put anything into production. As for the machinery and equipment that was used, I am sure it has all long been scrapped. "Or...were these tubes GARBAGE from the beginning for RCA and did only one out of maybe 10 of them made actually work, for any length of time? " The answer to your question is Yes, sort of. I will explain what I mean.... At the time these tubes were made, RCA was forging into new territory, and they were under a lot of pressure from the government in meating deadlines to demonstrate the viability of a "compatible all electronic" color tv system. In order to get the federal government to approve the RCA system over the CBS system, RCA had to demonstrate it's viability. So RCA was in a mad race to get something out to the public. So they had to do whatever they could to produce a tri color crt in record time. As a result they drew on whatever methods and technology they had used in the past. There was no frit glass at the time so they could not make a two piece crt out of just glass. There was no way to join a two piece all glass crt. The 15G had be made in two pieces so you can install the shadow mask and phosphor dot plate inside. Photo deposition of phosphor dots had not been invented at the time the 15G was produced. That came the following year invented by CBS. And all glass color crt's did not come into existance until 1957 with the introduction of the 21CYP22 in the CTC7 series, when frit glass became available. So the only way to join a two piece glass crt envelope together was to fuse the front and rear glass sections to a metal ring (bonding glass to metal was a perfected technology) and heli-arc the two metal rings together. There are more issues to deal with that I will explain in my presentation at the ETF. But sufice it to say that the 15G was a "Rube Goldberg" style picture tube...IE: it was a complicated solution to a problem. All you guys need to come the ETF convention and view the presentation. There will also be a number of touchy feely show and tell items that will be of interest. See ya all there, Bob
__________________
Vacuum tubes are used in Wisconsin to help heat your house. New Web Site under developement ME http://AntiqueTvGuy.com |
|
#4
|
||||
|
||||
|
15GP22 and others
I was a bit shocked to find this while searching for something else. Look at the list of CRTs at the bottom of the page.
Western Micronics John |
|
#5
|
||||
|
||||
|
Quote:
|
| Audiokarma |
|
#6
|
||||
|
||||
|
It is a bit strange that they list it as Black & White.
![]() "Rebuilt Black & White Picture Tubes 3KP4 5BP4 7DP4 15GP22 21AXP22 21CYP22 These antique tubes are rebuildable,and can be rephospored. Gassy tubes can be rebuilt." Has anybody checked to see if they can do the rebuild? jr |
![]() |
| Thread Tools | |
| Display Modes | |
|
|