Quote:
Originally Posted by jr_tech
"Hopefully, the frit seal protocol, being used by RACS in France, will continue to survive the rigors of the rebuild process."
I gotta ask... have they *actually* taken apart the funnel/front panel assembly, removed the troublesome metal flanges, perhaps lapped and acid fortified the edges, somehow mounted the shadow mask/phosphor plate and frited the works back together?
jr
|
Dear Jr,
It sounds like you have a viable process worked out. Currently, I'm not privy to the RACS frit seal protocol.
However, I'm sure Jerome will share his 15GP22 rebuild adventures at RACS during the ETF convention.
Kind regards,
03-15-2010, 02:43 PM
Threaded Mode