Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #14  
Old 03-10-2010, 12:47 AM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
I moved the balancing capacitor from its original position to the hot side of the yoke. I didn't take any before pictures because the ringing was so severe I was afraid it might damage something.

I haven't aligned the horizontal section or do any serious adjustment of the vertical. I was mainly interested in seeing whether the ringing would be reduced and if the focus would be good. The focus looks good, there is still a little bit of ringing.

The balancing cap in the original yoke was 47pf and the one in the RAM replacement is 68pf. I'll probably use a variable cap first to see what value works best.

Then I need to shim the yoke. For some reason it tilts down a little when it's mounted in the saddle.

Then I'll align the horizontal. That will take care of the curvature and reduce the flagging. There was always some flagging unless I was receiving an over the air broadcast. No chance of that now. There may be a minor problem in the sync separator.

John
Attached Images
File Type: jpg Test_Pattern.jpg (107.1 KB, 45 views)
File Type: jpg see_saw.jpg (127.8 KB, 49 views)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.