![]() |
|
|
|
#1
|
||||
|
||||
|
Well I learned something on this thread, but more importantly, holy cow!!! That set is gorgeous.
|
|
#2
|
||||
|
||||
|
Hey, thanks for the kind words. It was kind of a hulk when I got it (see below).
I added some final notes to the usual gabby article at http://antiqueradio.org/RCACTC-11Television.htm. Thanks are owed to the folks in this forum, who helped me with good advice and even a couple of free parts! Phil Nelson
|
|
#3
|
|||
|
|||
|
First of all, that set is BEAUTIFUL! And I bet it looks even better in person.
As for the purity, I have seen purity problems just from moving a TV past something magnetized like big speakers, and in one case a TV was moved to a new place in the room and a purity problem was caused by an iron pipe in the wall behind the TV. I guess that old iron pipe got magnetized somehow. I have one corner of my shop floor that is magnetized, and if I put a TV right on the slab I get minor purity problems, that are usually beyond the capacity of internal degaussing coils to clear up. (they made me put enough iron in the concrete slab to build a locomotive!) I see a VCR on the TV in one of those pictures. I have seen purity problems caused by that too. The big magnet in the capstan motor is pretty strong |
![]() |
| Thread Tools | |
| Display Modes | |
|
|