Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 03-09-2010, 12:46 AM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
This is getting to be more involved than I expected.

I checked for residual magnetism in the yoke. The earth's field in Michigan should be about 0.57 Gauss. The field along any axis in the yoke was 0.5 Gauss or less so it doesn't appear to be magnetized. At least not enough to cause any problems.

The first photo shows the rear of the yoke. You can see the bottom h-coil is distorted. The second photo shows that it doesn't appear to be cosine wound. The third photo shows the ends of the coils not being perpendicular to the axix. I think these all add up to the bad focus issue.

If you look through the mounting slot you can see the iron wire that forms the core.

I shortened the leads on the yoke and corrected the reversed horizontal lead connection. The ringing is terrible.

After getting the right image by swapping the leads, the blue lead was not connected to the hot side as both the schematic says and the data sheets indicate. The horizontal output choke appears to at least had one lead lengthened. I don't think it's possible for them to have reversed the output leads and have it work at all.

As John Folsom mentioned, the coil that has the capacitor across it should be on the hot side, which it isn't now that I have the right image. I'll have to move it to the hot side and see how well it works.

The data sheet with the RAM yoke says that when they supply the network with the yoke it's not connected. In this yoke it was already connected. They also give instructions for balancing the yoke if there is still ringing after properly connecting the supplied network. If connecting the capacitor to the other coil half doesn't eliminate all the ringing I'll have to build their little "X" checker device. Just a variable resistor and capacitor in series.

I don't want to run the set while it's in this condition, so I'll take photos once I get it working better.

In spite of the ringing, the focus problem is still gone.

The yoke appears to have been made by Chicago. It looks just like their TY-1 yoke.

John
Attached Images
File Type: jpg Yoke3.jpg (84.2 KB, 28 views)
File Type: jpg Yoke2.jpg (104.6 KB, 26 views)
File Type: jpg Yoke1.jpg (121.4 KB, 29 views)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:45 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.