Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 03-07-2010, 04:16 PM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
Quote:
Originally Posted by John Folsom View Post
John, I am afraid I am a poor student. I had forgotten your Sylvania was one of those very interesting RF HV supply sets, and would use s separate transformer (choke?) to drive the horizontal coils. I also note on the schematic the yoke coils are wired in parallel, so my supposition about the balancing capacitor is probably not valid. But hopefully when you reverse the leads on the yoke, your ringing issues will get better.

Good thing you don't have troubles with the RF HV coil, as some of these don't have a replacement.
The yoke that was in the set, and the replacement, are both made as you described with the coils in series and a capacitor across one coil. The 100-0002 yoke that is in the set was meant to be used in a center-tapped mode. The schematic shows the 100-0001 yoke where the windings are in parallel. That's the yoke that should have been in the set.

So, your comments really do apply.

I wonder why there are replacements for all of the other transformers and coils, but not the horizontal output thing?

John
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:24 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.