Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 03-04-2010, 06:47 PM
de.facto7's Avatar
de.facto7 de.facto7 is offline
AK Subscriber
 
Join Date: Feb 2010
Location: utah
Posts: 112
Well, that was interesting but no cupie doll. I have 4V on pin 2 to ground now on the 5y3 w/o tube and 6f6 with tube. With both those tubes in and the speaker plugged in, I still show a short on the bulb tester but not as sharp as before; it's still too high though. Without tubes, all the main voltages have reasonable readings as before. I still show no voltage on the + side of the 10uF 500V cap (which in now neg. to chassis).

Heeelllp! I'm not sure what to check next.

If my schematic was clearer, I think it would help. Are there other sources for those manuals? This is just such low res that even panning in, the words and numbers are a complete blur. Since I don't know enough about electronics, it's all guessing for me trying to figure it out.

You guys have been great and very patient. Thanks.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:30 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.