![]() |
|
|
|
#1
|
||||
|
||||
|
When you measured the voltage on C14 were you trying to measure it as AC or DC? The filament voltages and the voltages on the plates (pins 4 & 6) of the 5Z5 (5Y3) will all be AC. Everything else is DC.
I hope I don't sound condescending when I ask you questions like this because that is not my intention. I don't know what your experience is with working on electronics so that is why I am asking about how you are taking your measurements. I used to work in field service for my employer and did a lot of troubleshooting over the phone with people who did not know how to use a multimeter. I used to have to tell people to put the switch on their meter to the horseshoe for taking resistance measurements.
__________________
Sean - WØKPX |
|
#2
|
||||
|
||||
|
Reminds me of my days working in internet tech support telling people to click their mouse twice really really fast on the big blue E. LOL btw, I like your avitar - brings back memories!
|
|
#3
|
||||
|
||||
|
Well, in stating the obvious, something is killing your B+. I would next suggest that you disconnect everything from the rectifier socket that does not come from the transformer, power the radio up, and see what you have. If your voltage is back up, then you have issues further down the line. If your voltage is still flatlined, then there is something wrong with that 5y3, or the way you wired in the new socket. Whatever it is, we're getting to it.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|